Customer service
clear
Customer service
Our Contacts:
Mon-Fri: 9:00 am - 6:00 pm
Sat: 9:00 am - 4:00 pm
Sun: 9:00 am - 2:00 pm
8-100-9000-300
demo@demo.com27 Oak Street, Tenafly, US, 07670
Delivery:
Free delivery all orders of $120 or more of eligible items across any product category qualify
Payments:
Credit Card: Visa, MasterCard, Maestro, American Express
Return Policy:
You can return any item purchased within 16 days of the delivery date
Customer service
Roco 42615 Motorized Turntable
€449.00
Tax included
By buying this product you can collect up to 449 points. Your cart will total 449 points that can be converted into a voucher of €8.98.
Roco 42615 motorized turntable with an integrated electric motor and control unit. Suitable for HO-scale two- and three-rail layouts, with a 253 mm platform and configurable track exits.
Order now and receive it...
between 17 Apr and 22 Apr with Colissimo Points de retrait Free!
between 17 Apr and 22 Apr with Colissimo Domicile Free!
between 17 Apr and 22 Apr with DPD Livraison en relais Pickup Free!
between 17 Apr and 22 Apr with DPD Livraison à domicile Predict Free!
between today and 21 Apr with Magasin Next Model RC / Univers Train Free!
Turntable with integrated electric motor and control unit
Characteristic :
Brand: Roco
Ref: 42615
> Track code: 83 / 2.1 mm
Scale: HO
Operation: 2 and 3 rails
Rotating bridge with integrated electric motor and control device.
Suitable for all two-conductor DC tracks and for center-conductor AC tracks conforming to NEM (European model railway standards). Platform length of 253 mm, corresponding to 22 m on the original model.
The minimum angle between two track exits is 9 degrees. The turntable is supplied with spacers in divisions of 1°, 3°, 6°, and 9°. Therefore, any divisions from 9° upwards are possible in 1° increments between the track exits.
A total of 40 track exits can be set up. The turntable is supplied with four track exits for 2L=.
Other track exits are supplied as accessories (42616, contents: four 2L track exits =).
If the turntable is to be used on an AC network with a center conductor, the specialist seller will replace the original 2-track exit pack supplied with the turntable with a 3L~ track exit pack (42617, contents: three 3L~ track exits).
The platform motor operates on a 14V AC power supply. Power for operation is supplied via either direct current (DC) or alternating current (AC), depending on the system used. The turntable is equipped with a control unit for selecting the direction of travel and the rotation speed.
When the turntable button is released, the turntable stops precisely at the next track exit. Technically, the turntable is equipped for a preset control, allowing direct selection of the desired track exit. As with the original, two rotation speeds can be selected on the ROCO model. Power is supplied to the turntable. The power supply to the track exits can be adjusted using the control unit. This prevents the unintentional starting of a stationary locomotive when two track exits are opposite each other.*
A 1 m five-pole cable (transformer control unit) and a 2 m eight-pole cable (rotating bridge computer) are supplied.
Mounting dimensions:
Opening required for assembly: 280 mm.
Mounting depth measured from the top edge of the table: 50 mm.
Outer diameter of the turntable without track exits: 307 mm.
Platform length: 253 mm.
Suitable for all locomotives with a wheelbase up to 250 mm.
* When using the turntable in DCC (digital) drive mode, it is necessary to use a digital module for reversing loop.
Associated Products
Customers who bought this product also bought:
