ESU 59110 Micro LockPilot V5 Function Decoder, DCC/MM/SX, 8-pin, NEM 652

LokPilot 5 Fx Micro DCC/MM/SX

Brand: ESU
Ref: 59110
> Connector output: 8 pins - NEM 652
Protocol: DCC / MM / SX
Motor current: 180 mAh per output
> Exits: 6
> Dimensions: 8.0 x 7.0 x 2.9 mm

Function decoder. Cannot be used on a locomotive to control a motor.

The LokPilot 5 Fx micro and its twin, the LokPilot 5 Fx micro DCC, are extremely small function decoders, measuring only 8.0 mm x 7.0 mm and just 2.4 mm thick (2.9 mm at the capacitor). They are used in all N to H0 scale vehicles that do not require a motor output but still need to be able to switch lighting effects. LokPilot 5 Fx micro decoders are always offered with an 8-pin interface.

Modes:

The LokPilot 5 Fx DCC only communicates using the DCC protocol, but it can also automatically switch between RailComPlus® and RailComPlus® control stations. The LokPilot 5 Fx micro-decoder recognizes Märklin® braking distances as well as ZIMO® HLU/ZACK Commands or the Lenz® ABC system. It can also brake using DCC brake modules or a DC power supply. It can also stop using a Selectrix® brake diode. An automatic ABC shuttle train can shuttle between two stations. This is also important with a function decoder to synchronize the control cars and the motor vehicles. The LokPilot 5 Fx decoder can be used on analog DC railways. The decoder switches between operating modes fully automatically on the fly.

Features :

The LokPilot 5 Fx micro or LokPilot 5 Fx micro DCC is equipped with an impressive number of function outputs. There are six amplified function outputs, each with an output current of 180 mA, and two logic-level outputs for servos or Susi. The brightness of each output can be adjusted independently.

Operational security:

If necessary, a PowerPack can be connected to the LokPilot 5 Fx micro and the LokPilot 5 Fx micro DCC to fill in dirty rail sections.

Protection:

Of course, the outputs are protected against overload. We want you to enjoy your set-top box for as long as possible.