Roco 10807 Dual Booster for Z21 control unit

ESU 51942 black wiring wire, 10 meters long, for model railway layouts and wiring. Suitable for HO and N scales.

Peco PL-1000 electric under-table turnout motor with Twistlock system. Solenoid model designed for turnout control, with 16V AC power supply. Compatible microswitch option: PL-1005.

ESU 51943 red wiring wire, 10 meters long, for model railway layouts and installations. Suitable for HO and N scales.

Piko 55392 set for motorizing turnouts, including 1 control box for 4 motors and 4 electromagnetic motors. A practical set for equipping your model railway.

ESU 51830 SwitchPilot V3 accessory decoder for HO layouts operating on 2-rail DCC/MM. It has 4 magnetic outputs for turnout motors and other devices, with support for DCC or Motorola® modes and a special mode for Peco motors.

Roco 10857 transformer with 230V/20V power supply. 20V output, 120W, 6A DC current, with protection against short circuits, overloads, overvoltage, and overheating. Suitable as a power supply for the 10807 Z21 Dual Booster.

ESU SwitchPilot V3 Plus accessory decoder ref. 51831 for HO layouts operating on 2-rail DCC/MM. It features 8 magnetic outputs, multi-protocol DCC or Motorola® operation and an OLED screen with buttons for adjustment.

Roco 10808 feedback module for HO 2-rail DCC layouts. This Z21 occupancy detector allows monitoring of 8 track sections and signaling of occupied track, with connection via CAN bus and R bus.