Fleischmann 9128 Rail with ballast, curve R2, 7.5°

Fleischmann 9157 triple turnout with ballast, manually operated, in N scale (1/160). Length: 111 mm. Suitable for creating junctions on model railways.

Fleischmann 9122 N scale (1/160) curved track with ballast. 15° R1 track element with a radius of 192 mm measured at the center of the rail. 24 rails are needed to form a complete circle.

Fleischmann 9179 right-hand turnout with ballast, N scale (1/160). This 111 mm rail is equipped with a conductive core for good electrical contact and can be adapted for use with an electric motor.

Fleischmann 9125 N scale (1/160) curved track with ballast. R2 track element with a 45° curve, with a radius of 225.6 mm measured at the middle of the rail.

Fleischmann 9136 curved rail with ballast, R4 radius of 430 mm and angle of 15°. Element for N scale layout, suitable in particular for reverse curves for certain track switches.

Fleischmann 9103 straight track with ballast for N scale (1/160). 55.5 mm track element, corresponding to half the length of the 9101 base rail.

Fleischmann 9171 right-hand turnout with ballast, in N scale (1/160). Standard length of 111 mm, branch angle of 15° and branch radius of 430 mm. Adaptable for electric turnout drive.

Fleischmann 9127 curved track with ballast in N scale (1/160). R2 track element with a 15° angle and a radius of 225.6 mm measured at the middle of the rail.