Mon-Fri: 9:00 am - 6:00 pm
Sat: 9:00 am - 4:00 pm
Sun: 9:00 am - 2:00 pm
8-100-9000-300
demo@demo.com27 Oak Street, Tenafly, US, 07670
Free delivery all orders of $120 or more of eligible items across any product category qualify
Credit Card: Visa, MasterCard, Maestro, American Express
You can return any item purchased within 16 days of the delivery date
By buying this product you can collect up to
29
points.
Your cart will total 29
points that can be converted into a voucher of
€0.58.
MICROMOT 60 (replaces MICROMOT 50) Drill 12V 20000 rpm 6 clamps 1-3.2 mm Proxxon - 28500
The new MICROMOT 60, the 4th generation of a tool made in the EU that has proven itself millions of times.
between 26 Feb and 3 Mar with Colissimo Points de retrait €7.90
25 Feb with Pré-commande Free!
between 26 Feb and 3 Mar with Colissimo Domicile €8.90
between 26 Feb and 3 Mar with Livraison à domicile Predict sur créneau horaire €8.90
between 26 Feb and 3 Mar with Livraison en relais Pickup €7.90
Drill Milling machine MICROMOT 60
Particularly maneuverable thanks to their diameter of 35 mm, they also have a reduced weight (approx. 230 g), pleasant noise and smooth operation thanks to a balanced motor and the rectified axis mounted on a ball bearing. The use of MICROMOT clamps made of high-quality steel (see description below) allows extremely concentric tightening of the smallest tool tails. There is no grazing or jerking of the tool.
The use of MICROMOT 60 devices requires a transformer. We recommend micromot ng 2 transformers.
Without adjusting the rotational speed. (Constant 20,000 rpm). Tool holder by micromot steel clamps (1 piece 1 - 1.5 - 2 - 2.4 - 3 and 3.2 mm).
Remark:
The speed control of our 12-volt units only works with unstabilized power supplies (e.g. all MICROMOT transformers). A connection to stabilized power supplies is possible. Nevertheless, the devices then operate at maximum speeds (this also applies to battery operation).
Remark:
MICROMOT steel clamps are hardened, which gives them a high and constant elasticity 
. They retain the necessary precision even after a long use (incomparable to unquenched clamps with 4 slots or those made of brass or aluminum. The triple slot 
which is much more difficult to achieve than a quadruple slot, allows to obtain 
better sitting. This is especially important for the centering of stems with a small diameter.
Technical data:
Direct current 12 - 18 V.
40 W.
20.000/min.
Length of 220 mm.
Weight 230 g.
Appropriate accessories:
FS foot switch
Work hands-free. For all devices with a European plug (class 2) and a power up to 500 W max. Also suitable for workbench devices. Nylon case reinforced with fiberglass. Cord 250 cm for mains 230 V. 50 cm of cable output. For 12 V devices, the switch can be connected to the transfo.
NO. 28,700
MICROMOT extension cord
300 cm. For 12 volt devices. Male and female plugs with polarity.
NO. 28,992
KT70 - Micro coordinate table for MB 140/S and TBM 220 with Proxxon straps and fasteners - 27100The KT 70 table: small and precise. For MICROMOT supports and the TBM 220 built-in drill.
EL/A - Proxxon Cordless Soldering Iron (3.6 V) - 28142Electronically controlled temperature (470°C) and short heating time.Extra-large battery capacity (2.0 Ah) for long operating time.Lamp to illuminate the work area.
DB 250 - Micro-wood tower - Interpointe 250mm Proxxon - 27020Particularly suitable for turning small rooms: for dollhouses (plates, cups, dishes, vases, columns) and model trains: electric pylons and lampposts, windows, cisterns. For the manufacture of toys, puppet members and dolls and for...
FBS 240/E - Drill 100W max 22000 rpm chuck 0.3 to 3.2 mm box 40 tools Proxxon - 28472A multi-talent for delicate work. Precise and quiet. With quick-release mandrel. Made in the EU.
NG 2/S - Transfo MICROMOT 2A 24VA without Proxxon regulation - 28706MICROMOT transfos. The safe source of energy for low-voltage MICROMOT devices.
Cordless BS/A Industrial Belt Sander, with Fast Battery Charger + Li-Ion Battery Proxxon - 29810For sanding small openings, finishing shapes and surfaces, polishing grooves, filing burrs and flattening small areas.
Primus 100 Proxxon Jaw Prism Sliding Machine Vice - 20402Bit width of 100 mm.Aperture 75 mm.
TBM 220 - 3-speed established drill with 6 pliers from 1.0 to 3.2 mm Proxxon - 28128Fresh work table flat in aluminum cast iron, pressurized casting (220 x 120 mm) with parallel stop and graduation and threaded holes for fixing the MICRO-table with coordinates KT 70.
NG 2/E - Transfo MICROMOT 2A 24VA with Proxxon regulation - 28707 MICROMOT transfos. The safe source of energy for low-voltage MICROMOT devices.
Disc felt polisher, 2 pieces Proxxon - 28803
Extension cord for MICROMOT Proxxon devices - 28992300 cm.For 12-volt appliances.Male and female plugs with polarity.
Silicone polishers shape warhead, 5x15mm, 5 pieces Proxxon - 28288
Ø 22 mm corundum cutting discs, 10 pieces + Proxxon stand - 28810Discs Ø 22 x 0.7mm.
