Mon-Fri: 9:00 am - 6:00 pm
Sat: 9:00 am - 4:00 pm
Sun: 9:00 am - 2:00 pm
8-100-9000-300
demo@demo.com27 Oak Street, Tenafly, US, 07670
Free delivery all orders of $120 or more of eligible items across any product category qualify
Credit Card: Visa, MasterCard, Maestro, American Express
You can return any item purchased within 16 days of the delivery date
By buying this product you can collect up to
32
points.
Your cart will total 32
points that can be converted into a voucher of
€0.64.
MICROMOT 60/E (replaces MICROMOT 50/E) Drill 12V regul 5000/20000 rpm 6 pliers 1-3.2 mm Proxxon - 28510
The new MICROMOT 60, the 4th generation of an EU-made tool that has proven itself millions of times.
MICROMOT 60/E Strawberry Drill
Particularly handy thanks to their 35 mm diameter, they also have a reduced weight (approximately 230 g), pleasant noise and flexible operation thanks to a balanced engine and the rectified axis mounted on ball bearings. The use of high-quality steel MICROMOT clamps (see description below) allows for an extremely concentric tightening of the smallest tool tails. There is no grazing or bumps of the tool.
The use of MICROMOT 60 devices requires a transformer. We recommend microMOT NG 2 transformers.
Setting
electronic progressive rotation and power regime
high-level low-speed training. Tool holders by clamps
MICROMOT steel (1 Exhibit 1 - 1.5 - 2 - 2.4 - 3 and 3.2 mm).
Note:
The speed control of our 12-volt units only works with unstabilized power supplies (e.g. all MICROMOT transformers). A connection to stabilized power supplies is possible. However, the devices then operate at maximum speeds (this also applies to battery power).
Note:
MicroMOT steel clamps are soaked, giving them a high and constant elasticity 
. They retain the necessary precision even after long use (incomparable to unstipped clamps with 4 slots or brass or aluminum clamps. The triple slot 
which is much more difficult to achieve than a quadruple slot, allows for 
a better seating. This is particularly important for the centering of small diameter stems.
Technical data:
Continuous current 12 - 18 V.
40 W.
5,000 - 20,000/min.
Length of 220 mm.
Weight 230 g.
Appropriate accessories:
FS foot switch
Work with your hands free. For all devices with a European plug (class 2) and a power of up to 500 W max. Also suitable for set-up devices. A fibreglass-reinforced NYLON case. Cordon 250 cm for sector 230 V. 50 cm of cable out. For 12V devices, the switch can be plugged into the transformer.
NO. 28,700
MICROMOT electric extension cord
Three trillion inches. For 12-volt aircraft. Male and female sheets with polarity.
NO. 28,992
FLEX-DOT screwdriver for 6-sided screws (spherical head) HX 2 x 100 Proxxon - 22204With the HX-Ball, it is possible to screw six-sided hollow screws with a working angle of up to 25°.1
STS 12/E - 12V 100W 2A jigsaw with regulation delivered with 2 Proxxon blades - 28534 Ideal for cuttings in wood, turntables and non-ferrous metal. With a special powerful DC engine.
Industrial grinder-drill IBS/A cordless, incl. Fast Battery Charger + Li-Ion Battery Proxxon - 29800To drill, mill, grind, sand, clean, cut, engrave and sign.Comes with a wide range of accessories.
MICRO Screwdriver with base, 15 pieces Proxxon - 281484 Nickel-chromium-molybdenum steel blades (SAE 8660) for extreme hardness and strength. Chrome with burnished tip. Ergonomic handle made of quality plastic (shock, oil and acid resistant). Swivel ring and fingerprint for the finger.
MBS 240/E - HT Micro Band Saw Max Cutting 85 mm Table 220 x 200 mm - 27172Solid case made of ribbed cast aluminium (construction not made of steel tubes or stamped sheets).
MSG sculptor's motorized tool in 220V Proxxon - 28644 For all wood carving work.For the renovation and treatment of furniture.For the revival of antiques.For linocut and precise paint stripping.
LBS/E - Angular long neck drill 100w 22000 rpm in Proxxon box - 28485Cast aluminum transmission head with 75mm tapered neck.
MICROMOT 60/EF (replaces MICROMOT 50/EF) 12V 0.3 to 3.2 mm Proxxon - 28512The new MICROMOT 60, the 4th generation of an EU-made tool that has proven itself millions of times.
BD-134K hybrid dual-action airbrush box. double action metal bucket: 7cc glass bucket: 22cc Needles: 0.2mm, 0.3mm - 0.5mm Buses: 0.2mm, 0.3mm - 0.5mm Air hose length 1.8m Male G1/8 adapter / female G1/4
Brush in natural bristles Humbrol Evoco.For acrylic or enamel paint.
MB 200 - MICROMOT Proxxon drilling support - 28600Head with dovetail steerable at 90 degrees (graded ring available). Allows for sloping drilling and multi-purpose milling.
Brush in synthetic fibers Humbrol Color. Perfectly suitable for all types of paint, but is particularly effective when used with acrylic paint. For acrylic or enamel paint.
