Mon-Fri: 9:00 am - 6:00 pm
Sat: 9:00 am - 4:00 pm
Sun: 9:00 am - 2:00 pm
8-100-9000-300
demo@demo.com27 Oak Street, Tenafly, US, 07670
Free delivery all orders of $120 or more of eligible items across any product category qualify
Credit Card: Visa, MasterCard, Maestro, American Express
You can return any item purchased within 16 days of the delivery date
By buying this product you can collect up to
89
points.
Your cart will total 89
points that can be converted into a voucher of
€1.78.
IBS/E - Industrial grinder 100W 6 pliers from 1 to 3.2 mm, box 34 Proxxon tools - 28481
Precision equipment for cutting! With an aluminum cast iron head for greater stability!
To drill, mill, grind, sand, clean, cut, burn and sign. For precision mechanics, modeling, jewellery, optics, applied arts and electronics.
High concentricity accuracy (maximum 3/100 mm). No grazing, no tool beat.
To drill, mill, grind, sand, clean, cut, burn and sign. For precision mechanics, modeling, jewellery, optics, applied arts and electronics.
High concentricity accuracy (maximum 3/100 mm). No grazing, no tool beat.
A special DC motor bestseller balanced. Gradual electronic speed adjustment (full-wave electronics). A rectified steel axis mounted on ball bearing. With 6 triple-slit steel clamps (1 - 1.5 - 2 - 2.4 - 3 - 3.2 mm and clamping nut). Aluminium cast iron training head with 20 mm MICROMOT collar for use on drilling supports and horizontal supports. A fiberglass-reinforced POLYAMIDE central case. Delivered in a plastic briefcase with 34 tools.
For table or established employment, we recommend our tools with network connection. They are lighter, more manageable (shorter) and are not limited in their use.
The core of our MICROMOT precision tools for 230 V: Relatively expensive special DC engine with permanent magnet technology.
Technical data:
230 V. 5,000 - 22,000 rpm. 100 W.
Length 230 mm.
Weight 500g.
Protection insulation Class 2.
Comes with its quality PP briefcase. Well designed, solid and high in capacity. For storage of the device after use. The sticker on the side identifies the content.
Note:
MicroMOT steel clamps are soaked, giving them a high and constant elasticity 
. They retain the necessary precision even after long use (incomparable to unstipped clamps with 4 slots or brass or aluminum clamps. The triple slot 
which is much more difficult to achieve than a quadruple slot, allows for 
a better seating. This is particularly important for the centering of small diameter stems.
Accessories:
MICROMOT steel clamp set
Three slits and soaked. Sizes: 1 - 1.5 - 2 - 2.4 - 3 and 3.2. With clamping nut and storage base (see below).
NO. 28,940
IBS/A cordless industrial grinder-drill Proxxon - 29802To drill, mill, grind, sand, clean, cut, engrave and sign.Comes with a wide range of accessories.
TB 50 - Proxxon tabletop belt sander - 27030Sands longitudinal, frontal, round, tabular edges and, on folds, precise and orthogonal flat surfaces.Sanding speed 400 m/min.
MIC - MICRO Cutter Proxxon Proxxon - 28650 For cutting wood, plastics, reinforced plastic, fiberglass, paper, cardboard and similar materials. With a cutting width of 0.5 mm.
Original Failure for EL/A - Proxxon Cordless Soldering Iron - 28142-2
KT70 - Micro coordinate table for MB 140/S and TBM 220 with Proxxon straps and fasteners - 27100The KT 70 table: small and precise. For MICROMOT supports and the TBM 220 built-in drill.
THERMOCUT 230/E - Polystyrene hot wire cutter and Proxxon thermoplastic film - 27080For architectural models, for designers, decorators, artists (also for practical work of applied art) and for the construction of prototypes. In course for the classic model (trains, planes, boats).
MICROMOT 60 (replaces MICROMOT 50) Drill 12V 20000 rpm 6 clamps 1-3.2 mm Proxxon - 28500The new MICROMOT 60, the 4th generation of a tool made in the EU that has proven itself millions of times.
PS 13 - Non-rotating linear sander 12V 1A comes with 8 skates - 3 Proxxon abrasive sheets - 28594A super-thin sander with linear sanding (non-rotating) motion.
Liquid mask to cover and protect surfaces and elements during MIG Jimenez AMMO brand painting. 40mL jar.
Rectangular sticks in white plastic. For realization of models, models, model making, in architecture, etc. Quantity: 10 pieces.
120 by 5 piece grained silicon carbide sanding strip for BS/E, BS/A, RBS/A Proxxon - 28579
Disc felt polisher, 2 pieces Proxxon - 28803
Spare blade for MICRO Cutter MIC Proxxon - 28652Composed of spring steel (hardness 55 HRC).
120 grain sanding strip, 5 pieces for BS/E, BS/A, RBS/A Proxxon - 28582
Tungsten carbide metal rasp, cylindrical shape, 7.5 x 12 mm, Proxxon - 29060
Flexible 110/P with 3 ball bearings 35000 rpm with 6 pliers from 1 to 3.2 mm - 28620With precision aluminum accessory holders. With fast-tightening chuck.
