Mon-Fri: 9:00 am - 6:00 pm
Sat: 9:00 am - 4:00 pm
Sun: 9:00 am - 2:00 pm
8-100-9000-300
demo@demo.com27 Oak Street, Tenafly, US, 07670
Free delivery all orders of $120 or more of eligible items across any product category qualify
Credit Card: Visa, MasterCard, Maestro, American Express
You can return any item purchased within 16 days of the delivery date
By buying this product you can collect up to
339
points.
Your cart will total 339
points that can be converted into a voucher of
€6.78.
MBS 240/E - HT Micro Band Saw Max Cutting 85 mm Table 220 x 200 mm - 27172
Solid case made of ribbed cast aluminium (construction not made of steel tubes or stamped sheets).
Solid case made of ribbed cast aluminium (construction not made of steel tubes or stamped sheets).
Aluminum pulleys with double bearings. Stable table with flat-milled worktop, miter cut groove. (45° tilting plate for miter cuts). Belt guide mounted on 3 bearings and adjustable height. Adjustable for different slats of different widths. Silent drive with 220 Volt motor with Optibelt toothed belt. (superior quality and endurance). Electronically adjustable speed for extremely clean cuts (not requiring further finishing). A clear table illustrates the diets for virtually all materials. The ideal web format (5 x 0.4 mm) allows for rounded cuts with a small radius.
Technical data:
230 V. Adjustable belt speed from 180 to 330 m/min (feedback effect). Passage between the blade and the housing 150 mm. Maximum height passage 80 mm. Worktable 200 x 200 mm (rotatable from 0° to 45°). Weight Approximately 8 kg. A 1065 x 5 x 0.4 mm (14 teeth) saw band is part of the standard equipment.
The MBS 240/E is equipped with an outlet for the suction hose. For clean work. We recommend the use of our compact CW-matic workshop vacuum cleaner.
Separate blade guide
NO. 28 187
Standard Saw Band
Made of hardened Swedish steel. With fine teeth (24 d). For steel and brass.
NO. 28 174 1.065 x 5 x 0.4 mm
Likewise
but with coarse teeth (14 d).
NO. 28 176 1.065 x 5 x 0.4 mm
Extra-thin (3.5 mm) saw band for narrow radii
Made of specially coated steel with induction-hardened coarse teeth (14 d). Particularly suitable for aluminium and plastics.
NO. 28 180 1.065 x 3.5 x 0.5 mm
Bi-metal saw band
The saw teeth are made of high-alloy steel and are made of wear-resistant HSS. Variable teeth 10 - 14 d. Ideal for cutting all normal grades of steel, non-ferrous metals and stainless steel.
NO. 28 172 1.065 x 6 x 0.6 mm
Cutting Saw Tape
Extremely thin (1.3 mm), for very tight bending radii. Transforms the MICRO MBS 240/E band saw into a cutting saw. Made of special high-performance steel. Wavy and set teeth (10 teeth per inch). For all types of wood, plastics and non-ferrous metals.
NO. 28 182 1.065 x 1.3 x 0.44 mm
Diamond Saw Tape
For cutting stone, ceramic, glass or fiberglass. Only the correct cooling of the diamond tape ensures optimal cutting of the glass or ceramic and allows for a long service life of the tape. We recommend doing this with a brush.
NO. 28 186 1.065 x 3 x 0.3 mm
Hardened spring steel saw band (without teeth)
For cutting foam, plastic, rubber, leather, paper and cardboard.
NO. 28 184 1.065 x 6 x 0.4 mm
EL/A - Proxxon Cordless Soldering Iron (3.6 V) - 28142Electronically controlled temperature (470°C) and short heating time.Extra-large battery capacity (2.0 Ah) for long operating time.Lamp to illuminate the work area.
THERMOCUT 230/E - Polystyrene hot wire cutter and Proxxon thermoplastic film - 27080For architectural models, for designers, decorators, artists (also for practical work of applied art) and for the construction of prototypes. In course for the classic model (trains, planes, boats).
TBM 220 - 3-speed established drill with 6 pliers from 1.0 to 3.2 mm Proxxon - 28128Fresh work table flat in aluminum cast iron, pressurized casting (220 x 120 mm) with parallel stop and graduation and threaded holes for fixing the MICRO-table with coordinates KT 70.
FLEX-DOT screwdriver for 6-sided screws (spherical head) HX 2 x 100 Proxxon - 22204With the HX-Ball, it is possible to screw six-sided hollow screws with a working angle of up to 25°.1
Angle polisher WP/E 230V plastic box Proxxon - 28660Rotary movement to polish and progress quickly, as well as for cleaning, rusting and to "put the finishing touch" after painting.
Primus 100 Proxxon Jaw Prism Sliding Machine Vice - 20402Bit width of 100 mm.Aperture 75 mm.
PD 250/E - Precision tower - Between tips 250mm Proxxon - 24002 For shooting plan, longitudinal and conical turning, thread. For the machining of steel, brass, aluminum and plastic. Fixing flange for mounting the PF 230 drilling and milling device. Inter-tips 250mm.Height of the tips 70mm.Height...
STS 12/E - 12V 100W 2A jigsaw with regulation delivered with 2 Proxxon blades - 28534 Ideal for cuttings in wood, turntables and non-ferrous metal. With a special powerful DC engine.
