PRX-28940-MICROMOT clamps, 6 pieces 1.0 to 3.2 mm Proxxon
PRX-28940-MICROMOT clamps, 6 pieces 1.0 to 3.2 mm Proxxon
PRX-28940-MICROMOT clamps, 6 pieces 1.0 to 3.2 mm Proxxon
PRX-28940-MICROMOT clamps, 6 pieces 1.0 to 3.2 mm Proxxon

MICROMOT clamps, 6 pieces 1.0 to 3.2 mm Proxxon

€9.10
Tax included

By buying this product you can collect up to 9 point points. Your cart will total 9 points that can be converted into a voucher of €0.18.

PRX-28940
Proxxon

MICROMOT clamping pliers, 6 clamps 1.0 to 3.2 mm Proxxon - 28940

Has three slots and soaked. Sizes: 1 - 1.5 - 2 - 2.4 - 3 and 3.2.
With clamping nut and storage base

Order now and receive it...

between 25 Feb and 2 Mar  with  Colissimo Points de retrait €7.90

24 Feb  with  Pré-commande Free!

between 25 Feb and 2 Mar  with  Colissimo Domicile €8.90

between 25 Feb and 2 Mar  with  Livraison en relais Pickup €7.90

between 25 Feb and 2 Mar  with  Livraison à domicile Predict sur créneau horaire €8.90

MICROMOT clamping pliers, 6 clamps 1.0 to 3.2 mm.

Has three slots and soaked. Sizes: 1 - 1.5 - 2 - 2.4 - 3 and 3.2.
With clamping nut and storage base (see the note opposite on the right).

  1. Micromot steel clamps are quenched, which gives them a high and constant elasticity. They retain the necessary precision even after long use (incomparable to unspended clamps with 4 slots or those made of brass or aluminum).
  2. The triple slot which is much more difficult to achieve than a quadruple slot, allows to obtain a better seat.
  3. This is especially important for the centering of small diameter stems.

Drilling chuck or clamping pliers?

Our drilling chuck (Ref 28941) provides more comfort by allowing a quick change of tool when working with different axes (e.g. HSS drill according to DIN 338). Due to its technical structure, however, it has disadvantages compared to clamping pliers: lower clamping force and higher rotin tolerance. If high accuracy is required, it is imperative to work with MICROMOT clamps.

PRX-28940

Specific References

8 other products in the same category:

Etau Primus 75 sliding machine 75mm Proxxon - PRX-20392

Etau Primus 75 sliding...

Floor sliding machine with jaw prisms Primus 75 Proxxon - 20392 Bit width of 75 mm.Aperture 65 mm.

Price €56.00
Adapter for helical drills for BSG 220 Proxxon - PRX-21232

Adapter for helical drills...

Adapter for sharpening helical forests up to Ø 3 mm - Proxxon 21232Ø 1.5 to 3 mm for BSG 220 sharpener.1 piece of each in diameter 1.5 - 1.6 - 2 - 2.4 - 2.5 and 3 mm.Clean packaging in a wooden box with sliding lid.

Price €32.00
UHZ - Universal support with clamp, for all MICROMOT Proxxon machin...

UHZ - Universal support...

UHZ - Universal support with clamp, 20mm collar for all MICROMOT Proxxon machines - 28610With patella. Orientable from all sides.

Price €30.90
Mandrel up to 10 mm for LATHE PD 250/E Proxxon - PRX-24020

Mandrel up to 10 mm for...

Mandrel up to 10 mm for LATHE PD 250/E Proxxon - 24036Industrial chuck with CM 1For the mobile doll of the PD 250/E lathe.

Price €20.50
3m extension cord MICROMOT Proxxon - PRX-28992

3m extension cord MICROMOT...

Extension cord for MICROMOT Proxxon devices - 28992300 cm.For 12-volt appliances.Male and female plugs with polarity.

Price €7.90

Customers who bought this product also bought:

NG 2/E - Transfo MICROMOT 2A 24VA with Proxxon regulation - PRX-28707

NG 2/E - Transfo MICROMOT...

NG 2/E - Transfo MICROMOT 2A 24VA with Proxxon regulation - 28707 MICROMOT transfos. The safe source of energy for low-voltage MICROMOT devices.

Price €34.90
HKP/A - Proxxon Cordless 170° Glue Gun - PRX-28190

HKP/A - Proxxon Cordless...

HKP/A - Glue gun 170° with 4 glue sticks Ø 7 mm Lg 100 mm Proxxon - 28190For fast and reliable bonding of all types of parts. The delayed glue setting allows placement corrections!

Price €38.40
- Busch_7084
HO - 1/87

Price €7.50
Toothed crown chuck for TBM 220, 0.5 - 6.5 mm Proxxon - PRX-28122

Toothed crown chuck for TBM...

Toothed crown chuck for TBM 220, 0.5 - 6.5 mm Proxxon - 28122For stems from 0.5 to 6.5 mm.3/8" thread, compatible with TBM 220.

Price €8.70
Chuck 3 jaws from 0.3 to 3.2 mm MICROMOT Proxxon - PRX-28941

Chuck 3 jaws from 0.3 to...

Chuck 3 jaws from 0.3 to 3.2 mm for MICROMOT Proxxon devices - 28941For all MICROMOT devices that accept this equipment: FBS 12/EF grinder-drill, FBS 240/E precision grinder-drill, MICROMOT 60/EF milling drill and micromot 110/BF flexible. Advantageous especially for working with different axis...

Price €5.70

MICROMOT clamps, 6 pieces...

€9.10